The charger design allows for a much smoother charge and mugs will charge quicker than the standard chargers. Also there is less likelihood of a mug not charging when placed slightly off centre as the sides are higher and are better at guiding the mug onto the pins. They also have a smaller footprint and take up less desk or surface space. The chargers are 3d printed and may include some rough edges or small marks. Please be aware that they are all tested and will work with no problems.
 
The coasters are made of 3d printed parts and other components sourced from manufacturers. The chargers are compatible with all Ember Travel Mugs and Mugs and the power supply and cord are included.
The coaster is the smallest possible option for a Charger and is only 11mm high and raises the height of the charging mug by 6mm
Low cost alternative to an Ember Charger.
All Mugs and Travel Mugs 1st and 2nd Gen are supported.
The coasters are very stable and the mugs naturally sit in them and charge immediately on contact.
Package Includes: Charger and your choice of charging option.
The charger base is compatible with existing Ember chargers, if you do not require a charger you can select No on the options.
USB-C Chargers require a PD2 or PD3 charger of at least 30W and 20v output, they are compatible with genuine Ember chargers and desk/car chargers. For dual or illuminated chargers you will need a power supply with at least 45W
 
If you are looking for a specific colour please drop me a message and I will see if I can accomodate you.